Bringing the Best Together – Hi-tech Solutions from One Single Source
Borsig GmbH, with its subsidiaries Borsig Process Heat Exchanger GmbH, BorsigG ZM Compression GmbH, Borsig Membrane Technology GmbH Borsig Boiler Systems GmbH and Borsig Service GmbH, is an international leading company group for pressure vessels, heat exchangers, compressors, membrane technology, boiler and power plant technology and industrial services.
The company group with its five sites was founded 1837 in Berlin and still has its headquarters in the capital of Germany.
The actual product programme of the Borsig Group is as follows:
• Process gas waste heat recovery systems in ammonia, caprolactam, formaldehyde, methanol, nitric acid, hydrogen und coal gasification plants, as well as for plants for the partial oxidation of oil and natural gas (Texaco, Shell and other processes).
• Quench coolers (tunnel flow and linear design) in ethylene plants for cooling of cracked gas and high-pressure steam generation.
• Scraped surface exchangers for de-waxing of lube oil and recovery of paraxylol.
• Pressure vessels and heat exchangers for high-pressure drums, process gas pre-heaters, process gas steam super-heaters, vessels with weld overlay, etc.
• Reciprocating compressors for process gas discharge pressure: p = (ca. 3 ... 600) bar, capacity/flow: V= (ca. 100 ... 100,000) m_/h, power: P = (ca. 25 ... 9,600) kW.
• Reciprocating compressors for compressed natural gas (CNG) filling station suction pressure: p= (1.01 ... 25) bara, capacity/flow: V= (60 ... 1,725) m_/h, power: P= (25 ... 250) kW
• Centrifugal compressors for process gas.
• Roots blowers and blower systems.
• Membrane technology for recovery systems for hydrocarbons such as ethylene, propylene, volatile organic compounds (VOCs), solvents and others.
• Emission control systems for storage tanks, refineries and petrol stations and others.
• Fired boilers using gas-like and/or liquid fuels, to generate saturated and hot steam and/or hot water. Steam output = up to approximately 200to/h, steam pressure = up to approximately 100 barg (1,450psi), steam temperature = up to approximately 540°c and hot water output: up to approximately 150MW.
• Heat recovery boilers: thermal output = up to approximately 150MW, steam pressure = up to approx. 100 barg (1,450psi), steam temperature= up to approx. 540°C
• Combined heat and power systems.
• Power plant engineering.
• Industrial services for chemical and petrochemical plans, refineries, power plants, general industrial plants and district supply plants. We offer 24-hour service, construction, commissioning, maintenance (inspection, preventative maintenance, repair, trouble shooting), retrofitting, dismantling, technical consultation, fabrication and supply of spares according to the client’s design.
|
