Bit-sticking Phenomena in a Multidegree-of-freedom Controlled Drillstring
16. Baumgart A, Stick-slip and bit-bounce of deep-hole drillstrings, J Energ Resour Tech, 2000;122:78–82.
17. Chen SL, et al., Field investigation of the effects of stick-slip, lateral, and whirl vibrations on roller-cone bit performance, SPE Drilling and Completion, 2002;17(1):15–20.
18. Dufeyte M-P, et al., Detection and monitoring of the slip-stick motion: field experiments, Proceedings of the SPE/IADC Drilling Conference, Amsterdam, 1991;429–38.
19. Fear M, Progress toward a cure for slip-stick vibration with PDC bits, Proceedings of the IADC/SPE Drilling Conference, New Orleans, February 2000.
20. Kyllingstad A, Halsey GW, A study of slip/stick motion of the bit, SPE Drilling Engineering, 1988;369–73.
21. Lin Y-Q, Wang Y-H, Stick-slip vibration of drill strings, J Eng Ind Trans ASME, 1991;113:38–43.
22. Murdock A, Jelley D, Positive damping: A new PDC bit design characteristic that eliminates bit generated slip-stick, Proceedings of the IADC/SPE Drilling Conference, New Orleans, February 2000.
23. Khulief YA, et al., Vibration analysis of drill-strings with self excited stick-slip oscillations, J Sound Vib, 2007;299:540–58.
24. Sampaio R, et al., Coupled axial/torsinal vibrations of drilling- strings by mean of nonlinear model, Mech Res Comm, 2007;34(5–6):497–502.
25. Tucker RW, Wang C, Torsional vibration control and Cosserat dynamics of a drill-rig assembly, Meccanica, 2003;224(1): 123–65.
26. Christoforou AP, Yigit AS, Fully vibrations of actively controlled drillstrings, J Sound Vib, 2003;267:1029–45.
27. Navarro-López EM, Suárez R, Practical approach to modelling and controlling stick-slip oscillations in oilwell drillstrings, Proceedings of the IEEE Conference on Control Applications, Taipei, Taiwan, September, 2004;1454–60.
28. Navarro-López EM, Vibraciones mecánicas en la perforación de pozos, The Mexican Oil Industry Magazine, 2005;9: 24–6.
29. Navarro-López EM, Suárez R, Vibraciones mecánicas en una sarta de perforación: problemas de control, Revista
Iberoamericana de Automática e Informática Industrial, 2005;2(1):43–54.
30. Navarro-López EM, Cortés D, Avoiding harmful oscillations in a drillstring through dynamical analysis, J Sound Vib, 2007; 307(1–2):152–71.
31. Navarro-López EM, An alternative characterization of bit- sticking phenomena in a multi-degree-of-freedom controlled drillstring, Nonlinear Anal R World Appl, 2009;10(5):3162–74.
32. Navarro-López EM, Licéaga-Castro E, Non-desired transitions and sliding-mode control of a multi-DOF mechanical system with stick-slip oscillations, Chaos, Solitons & Fractals, 2009;41: 2035–44.
33. Kriesels PC, et al., Cost savings through an integrated Aaproach to drillstring vibration control, Proceedings of the SPE/IADC Middle East Drilling Technology Conference, Abu Dhabi, 1999.
34. Mensa-Wilmot G, et al., New PDC bit technology and improved operational practices saves $1M in Central North Sea drilling program, Proceedings of the SPE/IADC Drilling Conference, New Orleans, 2000.
35. Placido JCR, et al., Drillstring vibration and wellbore instability, J Energ Resour Tech Trans ASME, 2002; 124(4):217–22.
36. Henneuse H, Surface detection of vibrations and drilling optimization: Field experience, Proceedings of the IADC/SPE Drilling Conference, New Orleans, 1998;409–23.
37. Macpherson JD, et al., Application and analysis of simultaneous near bit and surface dynamics measurements, SPE Drilling and Completion, 2001;16(4):230–38.
38. Warren TM, Oster JH, Torsional resonance of drill collars with PDC bits in hard rocks, Proceedings of the SPE Annual Technical Conference and Exhibition, New Orleans, 1998;625–37.
39. Choquin A, Paramètres et contrôle du forage, Publications de L’ Institut Français du Pétrole, Éditions Technip, 1982.
40. Galle EM, Woods HB, Variable weight and rotary speed for lowest drilling cost, OGJ, November 14–21 1961.
41. Sosa Cerón A, Estudio Comparativo de los Principales Modelos de Perforación de Pozos Petroleros, Facultad de
Ingeniería, Universidad Autónoma de México, July 1978.
42. Abbassian F, Dunayevsky VA, Application of stability approach to torsional and lateral bit dynamics, SPE Drilling and Completion, 1998;13(2):99–107.
43. Jansen JD, van den Steen L, Active damping of self-excited torsional vibrations in oil well drillstrings, J Sound Vib, 1995;179(4):647–68.
44. Mihajlovic N, et al., Analysis of friction-induced limit cycling in an experimental drill-string system, Trans Asme, J Dyn Syst Meas Control, 2004;126:709–20.
45. Serrarensn AFA, et al., H∞ control for suppressing stick-slip in oil well drillstrings, IEEE Contr Syst Mag, April 1998; 19–30.
46. Navarro-López EM, What makes the control of discontinuous dynamical systems so complex?’, In: Sivasundaram S (editor), Mathematical Problems in Engineering, Aerospace and Sciences, vol. 5, Cambridge Scientific Publishers, UK, 2010.
47. Halsey GW, et al., Torque feedback used to cure slip-stick motion, Proceedings of the 63rd SPE Annual Technical Conference and Exhibition, Houston, Texas, 1988; 277–82.
48. Pavone DR, Desplans JP, Application of high sampling rate downhole measurements for analysis and cure of stick-slip in drilling, SPE Annual Technical Conference and Exhibition, New Orleans, 1994;335–45.
49. Yigit AS, Christoforou AP, Coupled torsional and bending vibrations of actively controlled drillstrings, J Sound Vib, 2000;234(1):67–83.
50. Navarro-López EM, Hybrid-automaton models for simulating systems with sliding motion: still a challenge, Proceedings of the 3rd IFAC Conference on Analysis and Design of Hybrid Systems, ADHS09, Zaragoza, Spain, 16–18 September 2009; 322–7.
51. Navarro-López EM, Possani-Espinosa E, Matemáticas y computación: lo fino de la perforación, El Mundo del Petróleo, December 2004–January 2005;7:20–24.
52. Ermentrout B, Simulating, Analyzing, and Animating Dynamical Systems (A Guide to XPPAUT for Researchers and Students), SIAM Software Environments Tools, 2002.
Nor Crane & Winch Group Norway – Singapore – Dubai – China – India
Nor Crane & Winch is one of the fastest growing companies within manufacturing of hydraulic and electric deck machinery, specialized for harbor tugs, anchor handlers / towing vessels, diving support vessels with equipment like anchor handler towing winches up to 300 T pull, 4-8 point mooring system both hydraulic and electrical driven, offshore and marine cranes from 40Tm up to 1250 Tm. Nor Crane has its own workshop in Singapore and Dubai with full test facilities for both winches and cranes in full accordance to class regulations .
For Enquiry and Information please contact : Singapore : Gul Rd. No.9 , Tel.65 6861 6923 Fax 65 6861 6924 Dubai : Al Jadaf Shipdocking Yard #79, Tel.971 4 324 8131 Fax 971 4 3248032 Norway : Bromsveien 11, 3183 Horten, Norway, Tel. +47 33152662 Fax +47 33082614 E-mail :
info@norcrane.com Web :
www.norcrane.ae
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108