Atlas Copco Rental UK Commences Its Largest Single Offshore Project
that IKM, Subsea 7 and BP set strict parameters throughout the project. Every machine test and performance, including the
Our experienced team of offshore personnel are fully offshore certified, including the latest specific requirements set out by the Norwegian authorities.
competence of our personnel, was audited and passed before the project could commence.
“We have worked on smaller type projects with IKM and others before,” adds Mr Spink. “This of course helps us understand what the customer may require of us, however each new project brings challenges and they need to be successfully overcome, such was the case here.
“The onshore simulated test runs, gave both us and the customer enhanced confidence that the equipment we were supplying was right for the project,” adds Mr Spink.
“The actual offshore phase of the work is due to take up to 28 days, so we needed to ensure the schedule could be maintained. We also needed to accurately determine all costs. As an example, the fuel
required to run the compressors and generators was precisely calculated to avoid any shortfall on board of the vessel.”
Once the pipeline has been cleaned and inspected, FPSO BP Skarv will manage the gas flow from the wells and direct it through the pipeline to the shore.
“As the extraction of gas and oil from offshore locations becomes increasingly complex, the demands to carry out the work efficiently and
Atlas Copco Rental continues to develop its expertise in delivering offshore rental packages that meet these demands.
safely increases,” adds Mr Spink. “Atlas Copco Rental continues to develop its expertise in delivering offshore rental packages that meet these demands.
We continuously invest in resources to supply the right equipment to increase the customers’ productivity, certified to meet strict safety parameters, on time and to budget.”
We aim to deliver beyond the customer’s expectations. n
Computational Flow Assurance
Risk Mitigation & Performance Improvement Flow, Thermal, Stress
3D Simulation Software & Services
Follow us online. For more information on Flow, Thermal & Stress Simulation:
Productivity Flexibility Expertise
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124