Aims and Scope
EXPLORATION & PRODUCTION – Aims and Scope Established: September 2002 Current Edition: Volume 9 Issue 2
Structure and Format • Exploration & Production – Oil & Gas Review publishes on a bi-annual basis, and comprises review articles, case reports, practice guides, theoretical discussions and original research.
• The structure of each edition comprises section categories determined by the Editor. The degree of coverage assigned to each category is the decision of the Editor.
• Articles are fully referenced, providing a comprehensive review of existing knowledge and opinion. • Each edition of Exploration & Production is also replicated in full online at
www.touchoilandgas.com
Submissions and Instructions to Authors • Contributors are identified and invited by the Editor.
• Following acceptance of an invitation, the author(s) and Editor formalise the working title and scope of the article.
• Subsequently, the Editor provides an ‘Instruction to Authors’ document and additional submission details.
Reprints
All articles included in Exploration & Production – Oil & Gas Review are available as reprints (minimum order 1,000). Please contact Cathy Peck at
cathy.peck@
touchbriefings.com or T: +44 (0) 20 7452 5286.
Distribution and Readership Exploration & Production – Oil & Gas Review is distributed in media partnership with relevant associations and through direct mail.
Copyright and Permission
Touch Briefings, a Touch Group plc company, is the sole owner of all articles and other materials that appear in Exploration & Production – Oil & Gas Review, unless otherwise stated. Permission to reproduce an article, either in full or in part, should be sought from the publication’s Editor.
About Touch Energy
Touch Energy, part of Touch Briefings, publishes three leading energy journals: Exploration & Production – Oil & Gas Review, Hydrocarbon World and Modern Energy Review. ■
OIL & GAS
Virtual Prototyping Solutions Supporting your engineering decisions throughout the supply chain
Manag
Assess design performance & structural integrity
validate
Optimize manufacturing processes & quality
age simulation models & process
www.esi-group.com/energy/oil-and-gas |
info@esi-group.com
Copyright © ESI Group 2011 G/RO/11.95/A -
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124